Low Profile Screw, Titanium, 4.0 mm x 34 mm

Spongiosaschraube, Titan, standard, 4 mm x 34 mm

Low Profile Screw, Titanium, Non-Locking, 4.0 x 34 mm

Low Profile Screw, Ti, sin bloqueo, Ø 4 mm x 34 mm

PARAFUSO DE BAIXO PERFIL DE TITANIO 4.0MM X 34MM

Finished Product

AR-8940-34

Human

Foot and Ankle

Product

The new Calcaneus Step Plate, designed by leading foot and ankle surgeons, is designed to dial-in the desired correction with incremental steps of 5 mm, 7.5 mm, and 10 mm. 
<ul>
 <li>Plates create a firm buttress to prevent redisplacement of a calcaneal sliding osteotomy</li>
 <li>Quick technique which requires little to no fluoroscopy for insertion</li>
 <li>Patient satisfaction may be improved due to not violating the heel pad with an incision or a screw</li>
 <li>Provides rigid fixation with an added dynamic slide compression slot for solid bone-to-bone contact</li>
</ul>

Calcaneus Step Plate

Child (D)

Designed to provide excellent fixation for fusions and osteotomies, these plates offer the foot and ankle surgeon a comprehensive option for procedures in the midfoot. These additions to the Low Profile Plating System come with and without wedge blocks, and in a variety of lengths to fixate lateral column lengthenings, calcaneocuboid arthrodesis, talonavicular arthrodesis and other less common procedures.&nbsp;
Features &amp; Benefits: 

<ul>
 <li>Left or Right Slants - Fits a variety of indications.</li>
 <li>Wedge Option - Wedges save OR time and eliminate the need to harvest a tricortical wedge from the iliac crest.</li>
 <li>Locking Option - The outermost holes allow the surgeon to choose a fixed-angle locking or variable-angle nonlocking option, depending on the needs of the patient.</li>
 <li>Compression Option - The inner slots generate compression when drilled eccentrically in arthrodesis applications.</li>
 <li>Minimized Profile - Low profile plates and screw heads reduce soft tissue irritation and the need for removal.</li>
 <li>Anatomic Contour - Optimizes construct strength, simplifies surgical technique and reduces soft tissue irritation.</li>
 <li>Screw Options - 3.5 mm cortical, 3.5 mm cortical locking and 4 mm cancellous.</li>
</ul>

H-Plates

Procedure

The Lapidus procedure is an arthrodesis of the 1st metatarsocuneiform joint. It is performed most commonly as a method to reduce the intermetatarsal angle (IMA) in the setting of hypermobility or arthritis of the 1st metatarsocuneiform joint.

Lapidus Hallux Valgus Correction

Low Profile Lapidus Plate, Titanium

Arthrex has a wide array of midfoot plating options housed in the CFS set. The surgeon can choose from specific TMT plates, H-plates, Lapidus plates, dorsal midfoot fusion plates, medial column plates, or mesh plates. The instrumentation for these implants is straightforward and easy to use, assisting the surgeon with distraction, provisional fixation, and other elements of the procedure.

Midfoot Plating Module

The plantar Lapidus plate was designed to provide fixation for a Lapidus procedure. The plate is placed plantar on the 1st tarsometatarsal (TMT) joint and is fixed with two 3.5 mm locking screws at both the distal and proximal ends to optimize construct strength. The precontoured left and right plates allow secure plantar placement and spare the tibialis anterior tendon. The plantar Lapidus plate provides compression over the entire arthrodesis area using a solid 4.0 mm compression screw through the plate. The plantar orientation avoids gapping of the arthrodesis site during early weightbearing.1
 
 
Reference
1. Klos K, Simons P, Hajduk AS, et al. Plantar versus dorsomedial locked plating for Lapidus arthrodesis: a biomechanical comparison.&nbsp;Foot Ankle Int. 2011;32(11):1081-1085. doi:10.3113/FAI.2011.1081

Low Profile Screw, Titanium, 4.0 mm x 34 mm

AR-8940-34

Related Pages

Foot and Ankle

Calcaneus Step Plate

Product

Foot and Ankle

H-Plates

Product

Foot and Ankle

Lapidus Hallux Valgus Correction

Procedure

Foot and Ankle

Midfoot Plating Module

Product

Foot and Ankle

Plantar Lapidus Plate

Product