Low Profile Screw, Titanium, 3.0 mm x 32 mm, Cortical

Low Profile Schraube, Titan, 3.0 mm x 32 mm

Low Profile Screw, Ti, 3.0 mm x 32 mm, Cortical

Tornillo cortical de bajo perfil, titanio, 3 mm x 32 mm

PARAFUSO DE BAIXO PERFILTM, TI, 3.0 X 32MM

Finished Product

AR-8933-32

Human

Foot and Ankle

Product

The Arthrex CFS plating system combines many of our current midfoot, forefoot, and hindfoot plate and screw systems into one set (AR-8950S). The set is conveniently divided into 2.4/3.0 mm and 3.5/4.0 mm (AR-8950S-01 and AR-8950S-02) modules that house the new Metatarsal Plates, TMT Plates, x-Plates, and newly revised H-Plates. Also included in the set are the Lapidus, Lisfranc, Opening Wedge, and MTP Plates. Screws are provided in locking and nonlocking options for 2.4 mm, 3 mm, 3.5 mm, and 4 mm sizes along with 3 mm and 4 mm cannulated screws. Presenting all of these components in one set gives surgeons the flexibility to choose the ideal plating system for any need. In addition, the new Mini Joint Distractor offers greater flexibility for joint preparation, visualization, and intraoperative compression of the fracture or fusion site.

Comprehensive Fixation System

Child (D)

The MaxForce MTP plates use two modes of compression to help provide maximized compression of the arthrodesis site. In addition to a standard oblong compression hole with eccentric drilling, these plates use a unique compression mechanism that allows surgeons to manually dial in compression for MTP fusions. The teeth in the plate align with the teeth on the compression device to work like gears. As the compression device is turned clockwise, the plate shifts proximally, compressing the MTP joint.
In addition, the new flat head cortical screws create a zero profile when seated fully into the plate, dramatically reducing hardware prominence.
Combined with an array of plate lengths and curvatures, the new MaxForce MTP plating system has been designed to offer surgeons the most comprehensive, compressive and lowest profile construct on the market today.

MaxForce™ MTP Plates

Arthrex mesh plates are available in titanium or stainless steel and standard and shorts lengths. Surgeons may cut the plates to size. The plates are intended for use in stabilization of fresh fractures, revision procedures, osteotomies, joint fusion, and reconstruction of small bones and bone fragments of the hand/wrist, foot/ankle, and osteopenic bone.

Mesh Plating System

Trauma Lower Extremities

Arthrex offers a wide variety of solutions in our ankle fracture portfolio, including titanium plating options. Plate offerings include locking third tubular plates, 3.5 mm reconstruction plates, and the locking distal fibular plate. Each plate is designed for use with the Syndesmosis TightRope® XP implant and includes a compression hole in the proximal shaft of the plate. The distal fibular plate also includes 3.0 mm variable-angle locking screws distally and suture eyelets for the addition of the AITFL InternalBrace™ ligament augmentation procedure.
 
The InternalBrace surgical technique is intended only to augment the primary repair/reconstruction by expanding the area of tissue approximation during the healing period and is not intended as a replacement for the native ligament. The InternalBrace technique is for use during soft tissue-to-bone fixation procedures and is not cleared for bone-to-bone fixation.&nbsp;

Titanium Ankle Fracture System

Trauma Upper Extremities

Procedure

Arthrex offers a wide variety of solutions in our ankle fracture portfolio, including titanium plating options. Plate offerings include:
<ul>
 <li>Locking straight plates</li>
 <li>Locking third tubular plates&nbsp;</li>
 <li>3.5 mm locking compression plates</li>
 <li>3.5 mm reconstruction plates</li>
 <li>Locking distal fibular plates</li>
 <li>Posterior/Fragment-specific plates</li>
 <li>Posterolateral plates</li>
 <li>Hook plates</li>
</ul>
 
Each plate is designed for use with the Syndesmosis TightRope® XP implant and includes a compression hole in the proximal shaft of the plate. The distal fibular plate also includes 3.0 mm variable-angle locking screws distally and suture eyelets for the addition of the AITFL InternalBrace™ ligament augmentation procedure.
 
The InternalBrace surgical technique is intended only to augment the primary repair/reconstruction by expanding the area of tissue approximation during the healing period and is not intended as a replacement for the native ligament. The InternalBrace technique is for use during soft tissue-to-bone fixation procedures and is not cleared for bone-to-bone fixation.&nbsp;

Low Profile Screw, Titanium, 3.0 mm x 32 mm, Cortical

AR-8933-32

Related Pages

Foot and Ankle

Comprehensive Fixation System

Product

Foot and Ankle

MaxForce™ MTP Plates

Product

Foot and Ankle

Mesh Plating System

Product

Trauma Lower Extremities

Titanium Ankle Fracture System

Product

Trauma Upper Extremities

Titanium Ankle Fracture System

Procedure