Guidewire with Trocar Tip, 1.35 mm

Führungsdraht mit Trokarspitze, Ø1.35 mm

Alambre guía con punta trocar, Ø 1.35 mm

FIO GUIA LISO COM PONTA TROCARTE Ø1.35 MM

Finished Product

AR-8737-01

Human

Foot and Ankle

Procedure

The Lapidus procedure is an arthrodesis of the 1st metatarsocuneiform joint. It is performed most commonly as a method to reduce the intermetatarsal angle (IMA) in the setting of hypermobility or arthritis of the 1st metatarsocuneiform joint.

Lapidus Hallux Valgus Correction

Low Profile Lapidus Plate, Titanium

Child (D)

Product

The plantar Lapidus plate was designed to provide fixation for a Lapidus procedure. The plate is placed plantar on the 1st tarsometatarsal (TMT) joint and is fixed with two 3.5 mm locking screws at both the distal and proximal ends to optimize construct strength. The precontoured left and right plates allow secure plantar placement and spare the tibialis anterior tendon. The plantar Lapidus plate provides compression over the entire arthrodesis area using a solid 4.0 mm compression screw through the plate. The plantar orientation avoids gapping of the arthrodesis site during early weightbearing.1
 
 
Reference
1. Klos K, Simons P, Hajduk AS, et al. Plantar versus dorsomedial locked plating for Lapidus arthrodesis: a biomechanical comparison.&nbsp;Foot Ankle Int. 2011;32(11):1081-1085. doi:10.3113/FAI.2011.1081

Plantar Lapidus Plate

Correction of claw or hammer toe deformity can be achieved using various techniques, including proximal interphalangeal joint arthrodesis (PIPJ). &nbsp;Interphalangeal Joint Fusion can be accomplished using the Arthrex&nbsp;Trim-It&nbsp;Pins and&nbsp;Trim-It&nbsp;Spin Pins.

Interphalangeal Joint Fusion

Trauma Lower Extremities

To address various types of fractures, the Patella SuturePlate™ II system offers three types of plates in different sizes. All plates are made of titanium and have a low-profile thickness of 1.6 mm with screws sitting flush on the plate. Suture holes in the plate can be optionally used for soft-tissue reattachment or ligament bracing.

Patella SuturePlate™ II

Trauma Upper Extremities

To address various types of patella fractures, the Patella SuturePlate™ II system offers three types of plates in different sizes. All plates are made of titanium and have a low-profile thickness of 1.6 mm with screws sitting flush on the plate. Suture holes in the plate can be optionally used for soft-tissue reattachment or ligament bracing.

Patella SuturePlate™ Plating System

The QuickFix™ Cannulated Screw System is a comprehensive set for fixation of the foot, ankle, hand, wrist, and elbow. The screws are cannulated, partially threaded, titanium alloy and are indicated for use in bone reconstruction, osteotomy, arthrodesis, joint fusion, fracture repair, and fracture fixation of bones appropriate for the size of the device.The QuickFix Screw System provides extensive versatility for surgical procedures of the foot all-in-one system. 

 
Complete Set – Full range of partially threaded, titanium, self-drilling and self-tapping cannulated screw options, in 2, 2.4, 3 and 4 mm diameters. 

 
Best Material – Titanium screws with Type II anodization to provide consistent strength, biocompatibility, and superior post-op imaging. 

 
Novel Instrumentation – Triple Plays (all-in-one near cortex drill, Countersink, and Depth Device) were designed to reduce OR time. 

 
Easy to Use – Color-coded implant and instrument tray saves OR time. 

 
Hexalobe Drive – Superior driver engagement – less potential for screw stripping.

QuickFix™ Cannulated ScrewSet

Hand and Wrist

The QuickFix™ Cannulated Screw System is a comprehensive set for fixation of the foot, ankle, hand, wrist, and elbow. The screws are cannulated, partially threaded, titanium alloy and are indicated for use in bone reconstruction, osteotomy, arthrodesis, joint fusion, fracture repair, and fracture fixation of bones appropriate for the size of the device. The QuickFix Screw System provides extensive versatility for surgical procedures of the foot all-in-one system. 

Complete Set – Full range of partially threaded, titanium, self-drilling and self-tapping cannulated screw options, in 2, 2.4, 3 and 4 mm diameters.
Best Material – Titanium screws with Type II anodization to provide consistent strength, biocompatibility, and superior post-op imaging.
Novel Instrumentation – Triple Plays (all-in-one near cortex drill, Countersink, and Depth Device) were designed to reduce OR time.
Easy to Use – Color-coded implant and instrument tray saves OR time.
Hexalobe Drive – Superior driver engagement – less potential for screw stripping.

Guidewire with Trocar Tip, 1.35 mm

AR-8737-01

Related Pages

Foot and Ankle

Lapidus Hallux Valgus Correction

Procedure

Foot and Ankle

Plantar Lapidus Plate

Product

Foot and Ankle

Interphalangeal Joint Fusion

Procedure

Trauma Lower Extremities

Patella SuturePlate™ II

Product

Trauma Upper Extremities

Patella SuturePlate™ Plating System

Procedure

Foot and Ankle

QuickFix™ Cannulated Screw Set

Product

Hand and Wrist

QuickFix™ Cannulated Screw Set

Product