Low Profile Screw, 2.4 x 12 mm, Cortex

Kortikalisschraube, Titan, 2.4 mm x 12 mm

Low Profile Screw, 2.4 mm x 12 mm, Cortex

Tornillo de bajo perfil, cortical, 2,4 mm x 12 mm

PARAFUSO DE BAIXO PERFIL CORTICAL 2.4 X 12MM

Finished Product

AR-8724-12

Human

Foot and Ankle

Product

Designed to make opening wedge osteotomies of the cuneiform easier and more stable, the Low Profile Cotton plates provide exact correction and a low-profile design to minimize soft-tissue irritation. Features and Benefits: 
<ul>
 <li>Exact Correction - flat, 2, 4, 6, and 8 mm wedges enable exact correction of the deformity.</li>
 <li>Low Profile - at 0.5 mm thick, patients may never feel the plate.</li>
 <li>Versatile - design allows for dorsal or medial placement, depending on the type of correction desired.</li>
</ul>

Low Profile System Cotton Plates

Child (D)

Procedure

Proximal metatarsal osteotomies work well to achieve reliable deformity correction in patients with a large 1st-2nd intermetatarsal angle. They may help minimize rotation, shortening, and elevation of the metatarsal. A number of osteotomy techniques have been described, including Ludloff, Mau, proximal crescentic, proximal chevron, scarf, opening wedge, and closing wedge, among others.

Proximal 1st Metatarsal Osteotomy 

The Arthrex CFS plating system combines many of our current midfoot, forefoot, and hindfoot plate and screw systems into one set (AR-8950S). The set is conveniently divided into 2.4/3.0 mm and 3.5/4.0 mm (AR-8950S-01 and AR-8950S-02) modules that house the new Metatarsal Plates, TMT Plates, x-Plates, and newly revised H-Plates. Also included in the set are the Lapidus, Lisfranc, Opening Wedge, and MTP Plates. Screws are provided in locking and nonlocking options for 2.4 mm, 3 mm, 3.5 mm, and 4 mm sizes along with 3 mm and 4 mm cannulated screws. Presenting all of these components in one set gives surgeons the flexibility to choose the ideal plating system for any need. In addition, the new Mini Joint Distractor offers greater flexibility for joint preparation, visualization, and intraoperative compression of the fracture or fusion site.

Comprehensive Fixation System

More than a plate, this is a complete system for joint preparation and fixation for the treatment of severe hallux rigidus and other MTP pathologies. Whether used in primary or revision cases, this system enables surgeons to reduce, compress, and lock the 1st metatarsal phalangeal joint in the ideal position for arthrodesis. Features &amp; Benefits:
<ul>
 <li>Anatomic Plate Design - 1.5 mm titanium plate is anatomically designed with 8 degrees of dorsiflexion and 5 degrees of valgus</li>
 <li>Concave, Convex Reamers - Facilitate quick and accurate joint preparation</li>
 <li>3 mm Variable-Angle Locking Screws - With a 30-degree cone of variability</li>
</ul>

Low Profile MTP Plates andScrews

The MaxForce MTP plates use two modes of compression to help provide maximized compression of the arthrodesis site. In addition to a standard oblong compression hole with eccentric drilling, these plates use a unique compression mechanism that allows surgeons to manually dial in compression for MTP fusions. The teeth in the plate align with the teeth on the compression device to work like gears. As the compression device is turned clockwise, the plate shifts proximally, compressing the MTP joint.
In addition, the new flat head cortical screws create a zero profile when seated fully into the plate, dramatically reducing hardware prominence.
Combined with an array of plate lengths and curvatures, the new MaxForce MTP plating system has been designed to offer surgeons the most comprehensive, compressive and lowest profile construct on the market today.

Low Profile Screw, 2.4 x 12 mm, Cortex

AR-8724-12

Related Pages

Foot and Ankle

Low Profile System Cotton Plates

Product

Foot and Ankle

Proximal 1st Metatarsal Osteotomy

Procedure

Foot and Ankle

Comprehensive Fixation System

Product

Foot and Ankle

Low Profile MTP Plates and Screws

Product

Foot and Ankle

MaxForce™ MTP Plates

Product