Finished Product

AR-13226

Instrumentencontainer für Doppelkompressionsplatte

Instrumentenset für Doppelkompressionsplatte

Foot and Ankle

Product

The Plantar Lapidus Plate was designed to provide fixation for a Lapidus procedure. The plate is placed plantar on the first tarsometatarsal (TMT) joint and is fixed with two 3.5 mm locking screws at both the distal and proximal ends to optimize construct strength. The precontoured left and right plates allow secure plantar placement and spare the tibialis anterior tendon. The Plantar Lapidus Plate provides compression over the entire arthrodesis area utilizing a solid 4.0 mm compression screw through the plate. The plantar orientation avoids gapping of the arthrodesis site during early weightbearing.

Plantar Lapidus Plate

Child (D)

Trauma Upper Extremities

The Titanium Wrist Plating System is designed for fixation of intra- and extra-articular fractures, osteotomies, and nonunions and malunions of the distal radius. The titanium volar plates are available in a wide array of sizes (narrow, standard, and wide) and in multiple shaft lengths. A variety of screw fixation options, aiming guides, and instrumentation allows for customization according to surgeon preference and fracture complexity. The Titanium Wrist Plating System is designed to provide the answer to your distal fixation repairs. 

 
Advantages
 
Anatomic: Plates are developed to fit the anatomy and contours of the distal radius for a low-profile repair and anatomic reduction of the fracture. 

 
Comprehensive: In addition to a comprehensive plate selection, multiple screw options are available, including fixed angle locking, variable-angle locking (VAL), and non-locking screws. 

 
Options: Fracture patterns create unique challenges and the variety of fixation options included provides multiple solutions for even the most complex fracture patterns. 

 
Straightforward Instrumentation: Separated into individual caddies, the instrumentation for the 2.4 mm and 3.5 mm screws is easy to identify. The screws sit in a graduated tray to ensure that proper screw length is given to the surgeon, reducing the time needed to measure screws by hand.

Titanium Wrist Plating System

Hand and Wrist

Procedure

The Titanium Wrist Plating System Technique is designed for fixation of intra-articular and extra-articular fractures, osteotomies, as well as nonunions and malunions of the distal radius. The titanium volar plates are available in a wide array of sizes (narrow, standard, and wide) and in multiple shaft lengths. A variety of screw fixation options, aiming guides, and instrumentation allows for customization according to surgeon preference and complexity of the fracture. The Titanium Wrist Plating System is developed to provide the answer to your distal fixation repairs.
 
Advantages
 
Anatomic: Plates are developed to fit the anatomy and contours of the distal radius for a low-profile repair and anatomic reduction of the fracture.
 
Comprehensive: In addition to a comprehensive plate selection, multiple screw options are available including fixed angle locking, variable angle locking, and nonlocking screws.
 
Options: Fracture patterns create unique challenges and the variety of fixation options included allow multiple solutions for even the most complex fracture patterns.
 
Straightforward Instrumentation: Separated into individual caddies, the instrumentation for the 2.4 mm and 3.5 mm screws are easy to identify. The screws sit in a graduated tray to ensure the proper screw length is selected, reducing the time needed to measure screws by hand.

Titanium Wrist Plating System Technique

Shoulder

The Clavicle Plate and Screw System is a comprehensive set of plates, screws, and instruments designed to treat midshaft and distal clavicle fractures. The stainless steel plates are low profile and precontoured with locking and nonlocking screw options in each plate. Secondary fixation to the coracoid is achieved through the plate using AC TightRope® implant technology, particularly the AC Dog Bone™ button.
The Knotless Distal Clavicle Plate Button TightRope implant is designed to be used in conjunction with any Arthrex distal clavicle plate and gives the surgeon knotless coracoid ﬁxation to help stabilize distal clavicle fractures.

Clavicle Plates and Screws

A choice of a midshaft or lateral plate is determined by the site of the fracture. The fracture is held in reduction while the plate is positioned on the clavicle and temporarily fixated with the use of a BB-Tak pin. The plate is then secured using locking or nonlocking screws. Divergent locking screws can also be used laterally. The lateral plate can also accommodate AC joint reconstruction with the Dog Bone™ button.
The Knotless Distal Clavicle Plate Button TightRope® implant is designed to be used in conjunction with any Arthrex distal clavicle plate and gives the surgeon knotless coracoid ﬁxation to help stabilize distal clavicle fractures.

Clavicle Plates Technique

The KreuLock locking compression screws combine the same proven technology found in our Headless Compression FT screws with a locking screw head to provide compression along the screw for treatment of fractures or fusions. Additionally, they are designed to bring the plate to bone.
<ul>
 <li>Variable-Stepped Thread Pitch – the screw tip’s wider thread pitch enters the bone faster than trailing threads, gradually compressing the fragments as the screw is advanced</li>
 <li>Locking Head – mates with existing plates</li>
 <li>Individual screw and instrument modules for each screw family</li>
 <li>Available in both titanium and stainless steel</li>
</ul>

KreuLock™ Locking Compression Screws

The KreuLock locking compression screws combine the same proven technology found in our Headless Compression FT screws with a locking screw head to provide compression along the screw for treatment of fractures or fusions.

The Lapidus procedure is an arthrodesis of the first metatarsocuneiform joint. It is performed most commonly as a method to reduce the intermetatarsal angle (IMA) in the setting of hypermobility or arthritis of the first metatarsocuneiform joint.

Lapidus Hallux Valgus Correction

More than a plate, this is a complete system for joint preparation and fixation for the treatment of severe hallux rigidus and other MTP pathologies. Whether used in primary or revision cases, this system enables surgeons to reduce, compress, and lock the 1st metatarsal phalangeal joint in the ideal position for arthrodesis. Features &amp; Benefits:
<ul>
 <li>Anatomic Plate Design - 1.5 mm titanium plate is anatomically designed with 8 degrees of dorsiflexion and 5 degrees of valgus</li>
 <li>Concave, Convex Reamers - Facilitate quick and accurate joint preparation</li>
 <li>3 mm Variable-Angle Locking Screws - With a 30-degree cone of variability</li>
</ul>

Low Profile MTP Plates andScrews

Comprehensive Fixation System, Lid

Tampa de sistema modular completo para pé

Caddy Lid, Comprehensive Fixation System

CFS Deckel für CFS Platten- und Instrumenteneinsätze

Comprehensive Foot Set Standard Caddy Lid

Tapa de caja estándar para juego completo de pie

Tampa da caixa padrão do conjunto completo para pé

Arthrex has a wide array of midfoot plating options housed in the CFS set. The surgeon can choose from specific TMT plates, H-plates, Lapidus plates, dorsal midfoot fusion plates, medial column plates, or mesh plates. The instrumentation for these implants is straightforward and easy to use, assisting the surgeon with distraction, provisional fixation, and other elements of the procedure.

Midfoot Plating Module

Trauma Lower Extremities

The Mini Fragment System (or “Mini Frag”) is designed to aid in the reduction and fixation of small and long bone trauma injuries. The tray modularity offers screw and plate options in 2.0 mm, 2.4 mm, and 2.7 mm sizes. With a wide array of plates to fit a multitude of trauma needs, the Mini Fragment System is a keystone addition to the Arthrex Trauma portfolio.
 
Features and Benefits
<ul>
 <li>Reduction instruments and 6 plate-bending options to meet surgeon and patient needs</li>
 <li>Reinforced plating options across all 3 plate sizes provide added stability when a stronger construct is desired</li>
 <li>A wide variety of plates and screws (2.0 mm screws in lengths up to 40 mm and 2.4 mm and 2.7 mm screws up to 80 mm)</li>
 <li>The split tray design provides intraoperative efficiency by simultaneously making general instruments and the size-specific caddies immediately available, reducing the overall footprint of the entire system</li>
 <li>Each caddy features a compact instrumentation drawer with size-specific short instrumentation</li>
</ul>
 
Indications
The Mini Fragment System is indicated for fracture fixation, reconstruction, replantation, stabilization, reduction, fusions, osteotomies, malunions, and nonunions of small bones and small bone fragments including normal and osteopenic bones in adult and adolescent (12-21 year) patients. The system is also indicated for non-load bearing stabilization and reduction of bone fragments in long bones.

Mini Fragment System 2.0 mm/2.4 mm/2.7 mm

To address various types of fractures, the Patella SuturePlate™ II system offers three types of plates in different sizes. All plates are made of titanium and have a low-profile thickness of 1.6 mm with screws sitting flush on the plate. Suture holes in the plate can be optionally used for soft-tissue reattachment or ligament bracing.

Patella SuturePlate™ II

Guidewire with Trocar Tip, 1.35 mm

Führungsdraht mit Trokarspitze, Ø1.35 mm

Alambre guía con punta trocar, Ø 1.35 mm

Fio-guia com ponta de trocarte, Ø 1.35 mm

A triple arthrodesis is the fusion of the subtalar, calcaneocuboid, and talonavicular joints. Arthrex has developed 5.0 mm Large and 7.0 mm XL Compression FT Screws and DynaNite® Nitinol staples as options for this procedure. After removing any remaining cartilage and subchondral bone and applying biologic materials to accelerate fusion, apply fixation to compress and stabilize the joint.

Triple Arthrodesis

Double Compression Plate, 2 Hole, SS, 20 mm

Double Compression Plate, 2 Hole, SS, 20 mm

Placa de doble compresión, 2 orificios, acero inoxidable, 20 mm

Placa de compressão dupla com 2 orifícios em aço, 20 mm

Double Compression Plate, 2 Hole, SS, 25 mm

Double Compression Plate, 2 Hole, SS, 25 mm

Placa de doble compresión, 2 orificios, acero inoxidable, 25 mm

Placa de compressão dupla com 2 orifícios em aço, 25 mm

Double Compression Plate, 2 Hole, SS, 30 mm

Double Compression Plate, 2 Hole, SS, 30 mm

Placa de doble compresión, 2 orificios, acero inoxidable, 30 mm

Placa de compressão dupla com 2 orifícios em aço, 30 mm

Double Compression Plate, 3 Hole, SS, 20 mm

Double Compression Plate, 3 Hole, SS, 20 mm

Placa de doble compresión, 3 orificios, acero inoxidable, 20 mm

Placa de dupla compressão com 3 orifícios em aço, 20 mm

Double Compression Plate, 3 Hole, SS, 25 mm

Double Compression Plate, 3 Hole, SS, 25 mm

Placa de doble compresión, 3 orificios, acero inoxidable, 25 mm

Placa de dupla compressão com 3 orifícios em aço, 25 mm

Double Compression Plate, 3 Hole, SS, 30 mm

Double Compression Plate, 3 Hole, SS, 30 mm

Placa de doble compresión, 3 orificios, acero inoxidable, 30 mm

Placa de dupla compressão com 3 orifícios e aço, 30 mm

Double Compression Plate, 4 Hole, SS, 20 mm

4-Loch Doppelkompressionsplatte, Gerade, 20 mm 4 Hole DBL Comp Plate Straight

Double Compression Plate, Straight, 4 Hole, SS, 20 mm

Placa de doble compresión, recta, 4 orificios, acero inoxidable, 20 mm

Placa de dupla compressão, reta com 4 orifícios em aço, 20 mm

Double Compression Plate, 4 Hole, SS, 25 mm

4-Loch Doppelkompressionsplatte, Gerade, 25 mm

Double Compression Plate, Straight, 4 Hole, SS, 25 mm

Placa de doble compresión, recta, 4 orificios, acero inoxidable, 25 mm

Placa de dupla compressão, reta com 4 orifícios em aço, 25 mm

Double Compression Plate, 4 Hole, SS, 30 mm

4-Loch Doppelkompressionsplatte, Gerade, 30 mm

Double Compression Plate, Straight, 4 Hole, SS, 30 mm

Placa de doble compresión, recta, 4 orificios, acero inoxidable, 30 mm

Placa de dupla compressão, reta com 4 orifícios em aço, 30 mm

Double Compression Plate, Square, 4 Hole, SS, 20 mm

4-Loch Doppelkompressionsplatte, Viereck, 20 mm

Double Compression Plate, Square, 4 Hole, SS, 20 mm

Placa de doble compresión, cuadrada, 4 orificios, acero inoxidable, 20 mm

Placa de dupla compressão, quadrada com 4 orifícios em aço, 20 mm

Double Compression Plate, Square, 4 Hole, SS, 25 mm

4-Loch Doppelkompressionsplatte, Viereck, 25 mm

Double Compression Plate, Square, 4 Hole, SS, 25 mm

Placa de doble compresión, cuadrada, 4 orificios, acero inoxidable, 25 mm

Placa de dupla compressão, quadrada com 4 orifícios em aço inoxidável, 25 mm

Double Compression Plate, Square, 4 Hole, SS, 30 mm

4-Loch Doppelkompressionsplatte, Viereck, 30 mm

Double Compression Plate, Square, 4 Hole, SS, 30 mm

Placa de doble compresión, cuadrada, 4 orificios, acero inoxidable, 30 mm

Placa de dupla compressão, quadrada com 4 orifícios em aço, 30 mm

DynaNite Nitinol Staple with Instruments, 9 mm x 7 mm

DynaNite-Nitinolklammerimplantatsystem, 9 mm x 7 mm

DynaNite Nitinol Staple Implant System, 9W x 7L

DynaNite, sistema de implante com agrafos em nitinol , 9 L x 7 C

DynaNite Nitinol Staple with Instruments, 9 mm x 10 mm

DynaNite-Nitinolklammerimplantatsystem, 9 mm x 10 mm

DynaNite Nitinol Staple Implant System, 9W x 10L

DynaNite, sistema de implante com agrafos em nitinol , 9 L x 10 C

DynaNite Nitinol Staple with Instruments, 11 mm x 10 mm

DynaNite-Nitinolklammerimplantatsystem, 11 mm x 10 mm

DynaNite Nitinol Staple Implant System, 11W x 10L

DynaNite, sistema de implante com agrafos em nitinol , 11 L x 10 C

DynaNite Nitinol Staple with Instruments, 11 mm x 15/12 mm

DynaNite-Nitinolklammerimplantatsystem, 11 mm x 15 mm / 12 mm

DynaNite Nitinol Staple Implant System, 11W x 15/12L

DynaNite Nitinol Staple with Instruments, 13 mm x 10 mm

DynaNite-Nitinolklammerimplantatsystem, 13 mm x 10 mm

DynaNite Nitinol Staple Implant System, 13W x 10L

DynaNite Nitinol Staple with Instruments, 13 mm x 15/12 mm

DynaNite-Nitinolklammerimplantatsystem, 13 mm x 15 mm / 12 mm

DynaNite Nitinol Staple Implant System, 13W x 15/12L

DynaNite Nitinol Staple with Instruments, 15 mm x 12 mm

DynaNite-Nitinolklammerimplantatsystem, 15 mm x 12 mm

DynaNite Nitinol Staple Implant System, 15W x 12L

DynaNite Nitinol Staple with Instruments, 15 mm x 15 mm

DynaNite-Nitinolklammerimplantatsystem, 15 mm x 15 mm

DynaNite Nitinol Staple Implant System, 15W x 15L

DynaNite Nitinol Staple with Instruments, 18 mm x 15 mm

DynaNite-Nitinolklammerimplantatsystem, 18 mm x 15 mm

DynaNite Nitinol Staple Implant System, 18W x 15L

DynaNite Nitinol Staple with Instruments, 18 mm x 18 mm

DynaNite-Nitinolklammerimplantatsystem, 18 mm x 18 mm

DynaNite Nitinol Staple Implant System, 18W x 18L

DynaNite Nitinol Staple with Instruments, 18 mm x 18/15 mm

DynaNite-Nitinolklammerimplantatsystem, 18 mm x 18 mm / 15 mm

DynaNite Nitinol Staple Implant System, 18W x 18/15L

DynaNite Nitinol Staple with Instruments, 20 mm x 15 mm

DynaNite-Nitinolklammerimplantatsystem, 20 mm x 15 mm

DynaNite Nitinol Staple Implant System, 20W x 15L

DynaNite Nitinol Staple with Instruments, 20 mm x 20 mm

DynaNite-Nitinolklammerimplantatsystem, 20 mm x 20 mm

DynaNite Nitinol Staple Implant System, 20W x 20L

DynaNite Nitinol Staple with Instruments, 25 mm x 20 mm

DynaNite-Nitinolklammerimplantatsystem, 25 mm x 20 mm

DynaNite Nitinol Staple Implant System, 25W x 20L

DynaNite Nitinol Staple, 9 mm x 7 mm

DynaNite Nitinol Staple, 9 mm x 10 mm

DynaNite Nitinol Staple, 11 mm x 10 mm

DynaNite Nitinol Staple, 11 mm x 15/12 mm

DynaNite-Nitinolklammer, 11 mm x 15 mm / 12 mm

DynaNite Nitinol Staple, 13 mm x 10 mm

DynaNite Nitinol Staple, 13 mm x 15/12 mm

DynaNite-Nitinolklammer, 13 mm x 15 mm / 12 mm

DynaNite Nitinol Staple, 15 mm x 12 mm

DynaNite Nitinol Staple, 15 mm x 15 mm

DynaNite Nitinol Staple, 18 mm x 15 mm

DynaNite Nitinol Staple, 18 mm x 18 mm

DynaNite Nitinol Staple, 18 mm x 18/15 mm

DynaNite-Nitinolklammer, 18 mm x 18 mm / 15 mm

DynaNite Nitinol Staple, 20 mm x 15 mm

DynaNite Nitinol Staple, 20 mm x 20 mm

DynaNite Nitinol Staple, 25 mm x 20 mm

DynaNite SuperMX Staple, 15W x 15L

DynaNite-SuperMX-Nitinolklammer, 15 mm x 15 mm

DynaNite SuperMX Nitinol Staple, 15W x 15L

DynaNite SuperMX Staple with Instrumentation, 15W x 15L

DynaNite-SuperMX-Nitinolklammerimplantatsystem, 15 mm x 15 mm

DynaNite SuperMX Nitinol Staple with Instrumentation , 15W x 15L

DynaNite SuperMX Staple, 18W x 15L

DynaNite-SuperMX-Nitinolklammer, 18 mm x 15 mm

DynaNite SuperMX Nitinol Staple, 18W x 15L

DynaNite SuperMX Staple with Instrumentation, 18W x 15L

DynaNite-SuperMX-Nitinolklammerimplantatsystem, 18 mm x 15 mm

DynaNite SuperMX Nitinol Staple with Instrumentation , 18W x 15L

DynaNite SuperMX Staple, 18W x 18L

DynaNite-SuperMX-Nitinolklammer, 18 mm x 18 mm 

DynaNite SuperMX Nitinol Staple, 18W x 18L

DynaNite SuperMX Staple with Instrumentation, 18W x 18L

DynaNite-SuperMX-Nitinolklammerimplantatsystem, 18 mm x 18 mm 

DynaNite SuperMX Nitinol Staple with Instrumentation , 18W x 18L

DynaNite SuperMX Staple, 20W x 15L

DynaNite-SuperMX-Nitinolklammer, 20 mm x 15 mm

DynaNite SuperMX Nitinol Staple, 20W x 15L

DynaNite SuperMX Staple with Instrumentation, 20W x 15L

DynaNite-SuperMX-Nitinolklammerimplantatsystem, 20 mm x 15 mm

DynaNite SuperMX Nitinol Staple with Instrumentation , 20W x 15L

DynaNite SuperMX Staple, 20W x 20L

DynaNite-SuperMX-Nitinolklammer, 20 mm x 20 mm

DynaNite SuperMX Nitinol Staple, 20W x 20L

DynaNite SuperMX Staple with Instrumentation, 20W x 20L

DynaNite-SuperMX-Nitinolklammerimplantatsystem, 20 mm x 20 mm

DynaNite SuperMX Nitinol Staple with Instrumentation , 20W x 20L

DynaNite SuperMX Staple, 25W x 20L

DynaNite-SuperMX-Nitinolklammer, 25 mm x 20 mm

DynaNite SuperMX Nitinol Staple, 25W x 20L

DynaNite SuperMX Staple with Instrumentation, 25W x 20L

DynaNite-SuperMX-Nitinolklammerimplantatsystem, 25 mm x 20 mm

DynaNite SuperMX Nitinol Staple with Instrumentation , 25W x 20L

Compression FT Screw, 3.5 Mini, 12 mm Length

Mini Compression FT, Titan, 3.5 mm x 12 mm

Mini Compression FT, titanium, 3.5 mm x 12 mm

Tornillo de compresión FT, Mini, 3.5 x 12 mm

Parafuso de compressão FT, mini, 3.5 mm x 12 mm

BB-Tak Non-Threaded, qty. 2

AR-13226

Add to Cart

AR-13226 is a Set Item Of (2)

AR-13226 is a Set Item Of (2)

AR-8006S

AR-8007S

Related Pages

Foot and Ankle

Plantar Lapidus Plate

Product

Trauma Upper Extremities

Titanium Wrist Plating System

Product

Hand and Wrist

Titanium Wrist Plating System Technique

Procedure

Shoulder

Clavicle Plates and Screws

Product

Shoulder

Clavicle Plates Technique

Procedure

Foot and Ankle

KreuLock™ Locking Compression Screws

Product

Foot and Ankle

Lapidus Hallux Valgus Correction

Procedure

Foot and Ankle

Low Profile MTP Plates and Screws

Product

Foot and Ankle

Midfoot Plating Module

Product

Foot and Ankle

Mini Fragment System 2.0 mm/2.4 mm/2.7 mm

Product

Trauma Lower Extremities

Patella SuturePlate™ II

Product

Foot and Ankle

Triple Arthrodesis

Procedure